| Rheo011 |
Laboratory
Scaled Mixers for Rubber Compound Qualification ... Electrical
Conductivity |
| LR8906-01 |
Establishing
The Test Weight For Mixer Tests |
| LR8906-02 |
Test
Parameters For Mixer Tests |
| LR8906-03 |
Determination
Of The Resident Time For The Twin-Screw Extruder |
| LR8906-04 |
Helpful
Data For Tests With Extruder Sensors |
| LR8906-05 |
Investigation
Of The Influence Of Two Types Of Carbon Black On The Flow
Behaviour Of SAN |
| LR8906-06 |
Investigation
Of The Flow Characteristics Of PEPT At Different Temperatures |
| LR8906-07 |
Energy
Calculation In Mixers ?Torque And Specific Mechanical Energy |
| LR8906-08 |
Differentiating
Rubber Compounds With The Same Mooney Viscosity |
| LR8906-09 |
Investigation
Of PVC Dry Blends With Different Stabilisers |
| LR8906-10 |
Differentiating
PVC Dry Blend Batches With An Extruder Sensor |
| LR8906-11 |
Flow
And Cross-Linking Behaviour Of Cross-Linking Polyethylene?s
(XLPE) |
| LR8906-12 |
The
Curing Behaviour Of Reaction Resin Compounds |
| LR8906-13 |
Characterising
Masterbatches Using The Screen Life Test Method |
| LR8906-14 |
Pigment
Differentiation In Masterbatches |
| LR8906-15 |
Testing
The Flow Characteristics Of Glass Fibre Reinforced TPU |
| LR8906-16 |
Extruding
Polymers: Viscosity And Die Swell Depending On The Extrusion
/ Shear Rate |
| LR8906-17 |
Examining
The Plastifying And Degradation Behaviour Of PVC |
| LR8906-18 |
Examining
The Influence Of Stabilisers On The Flow Characteristics Of
Polyamide |
| LR8906-19 |
Differentiating
PP Samples From Different Suppliers With The Same MFI Value |
| LR8906-20 |
Testing
The Flow Properties Of Acrylnitril-Butadiene-Styrol-Terpolymer
(ABS) |
| LR8906-21 |
Testing
The Flow Behaviour Of Two Batches Of A Ceramic Injection Moulding
Compound |
| LR8906-22 |
Application
Of The Speed Program For The Differentiation Of Two Natural
Rubber Samples |
| LR8906-23 |
Application
Of The Temperature Program For The Investigation Of The Gelling
Behaviour Of Plastisols |
| LR8906-24 |
Influence
Of The Incorporation Sequence Of Different Components Of The
Same Recipe On The Energy Consumption If The Mixing Process |
| LR8906-26 |
Testing
The Behaviour Of Thermosetting Compounds With Respect To Flow
And Rate Of Cure Making Use Of A Torque Rheometer |
| LR8906-27 |
Innovative
Solutions For Polymer Processing & Characterisation |
| LR8906-28 |
Compounding
?Processing ?Rheological Testing: All In One Test Run |
| LR8906-29 |
How
To Relate The Results Of A Torque Rheometer To Problems In
Elastomer Processing |
| LR8906-30 |
The
Residual Current Operated Device & PolyLab |
| LR8906-31 |
OQT512
?Applications When Used With The Blown-Film & Sheet, Tape
And Ribbon Take-Off |
| LR8906-32 |
Optimising
Mixer Tests With The Help Of The Worksheet Technique |
| LR-33 |
Viscosity
Measurement Of LDPE Samples With The Same MFI Value |
| LR-35 |
Characterisation
Of PVC-Compounds |
| LR-36 |
In-Process
Measurement At-Line Testing Of 3 HDPE For Determining Film
Quality And Simultaneous On-Line MFR/MVR Monitoring |
| LR-37 |
Use
of Modern PolyLab Torque Rheometer System for Material Characterisation |
| LR-40
(7-99) |
Rubber
Testing. Kinetic Quality Control Of Rubber Carbon Black |
| LR-44E |
Test
Methods for Characterisation and Optimisation of Recycling
Polymers |
| LR-45E |
Determining
Formulation and predicting Processibility of "PIM"
Feedstock |
| LR-46E |
Conductivity
Measurement for Rubber Compound Qualification |
| ElongVisc |
Elongational
Viscosity of Polymer Melts. A new Method For Labwork and On-Line
Monitoring |
| PPS99
P-40(105) |
Viscosity
Measurement Of Novel Polymers And Additives Using A Conical
Micro Twin-Screw Compounder |
| PPS99
D-8(59) |
Development
Of Polypropylene-Clay Nanocomposite Through The Ultrasonic
Melt Intercalation |
| SolidPhase |
Solid-Phase
Grafting Of Glycidyl Methacrylate Onto Polypropylene |
